Jackery vs Bluetti: Which Power Station Brand Wins?
Jackery vs Bluetti compared size class by size class on our scores, cycle life, warranty, UPS speed and solar input, with a verdict on which brand to buy.
Amphourly is reader-supported. When you buy through links on this page we may earn an affiliate commission, at no extra cost to you. Rankings come from our published scoring method, not from who pays. How we make money
BLUETTI wins most size classes. Its Elite line pairs 5-year warranties with cycle life rated to 80% capacity, faster UPS switchover and, at 1kWh, more than twice Jackery’s solar input. Pick Jackery if low weight matters most at 1kWh or you want 3,000 W of expandable output at 2kWh, where the Explorer 2000 Plus beats BLUETTI on muscle and growth even though the Elite 200 V2 scores higher.
Brand comparisons usually pit one cherry-picked model against another. We’ve matched every current Jackery Explorer and BLUETTI station in our database by capacity, then scored them on the same published rubric. Both brands use LiFePO4 cells across the board (see LiFePO4 vs NMC for why that matters), so the differences come from everything else.
| Spec | Jackery Explorer 1000 v2 | BLUETTI Elite 100 V2 | Jackery Explorer 2000 Plus | BLUETTI Elite 200 V2 |
|---|---|---|---|---|
| Score | 6.2 | 8.1 | 7.3 | 7.8 |
| Battery chemistry | LiFePO4 | LiFePO4 | LiFePO4 | LiFePO4 |
| Rated cycle life | — | 4,000 | — | 6,000 |
| AC output | 1,500 W | 1,800 W | 3,000 W | 2,600 W |
| Energy density | 44.96 Wh/lb | 40.96 Wh/lb | 33.22 Wh/lb | 38.83 Wh/lb |
| AC recharge time | 60 min | 70 min | — | 84 min |
| Solar recharge rate | 0.37 W per Wh | 0.98 W per Wh | 0.69 W per Wh | 0.48 W per Wh |
| Expandable | No | No | Yes | No |
| UPS switchover | 20 ms | 10 ms | 20 ms | 15 ms |
| Warranty | 3 yr | 5 yr | 3 yr | 5 yr |
| App control | wifi+bluetooth | wifi+bluetooth | wifi+bluetooth | wifi+bluetooth |
| Launch MSRP | $799 | — | — | — |
How do Jackery and Bluetti lineups compare by size class?
| Size class | Jackery (score) | BLUETTI (score) | Edge |
|---|---|---|---|
| ~300 Wh | Explorer 300 Plus (5.2) | Elite 30 V2 (6.4) | BLUETTI |
| 450–770 Wh | none | AC50B (7.0), AC70 (7.5) | BLUETTI by default |
| ~1 kWh | Explorer 1000 v2 (6.2) | Elite 100 V2 (8.1) | BLUETTI |
| 1.1–1.3 kWh | Explorer 1000 Plus (6.9) | AC180 (6.9) | Tie |
| ~2 kWh | Explorer 2000 Plus (7.3) | Elite 200 V2 (7.8), AC200L (7.6) | BLUETTI |
| 2.7–3 kWh | Explorer 3000 v2 (6.6) | Apex 300 (8.6) | BLUETTI |
| 5 kWh | Explorer 5000 Plus (8.1) | none | Jackery by default |
BLUETTI takes four of the five head-to-head classes, wins the 1kWh and 3kWh matchups by close to two points, and ties the fifth. It also covers the 450–770 Wh gap where Jackery has no current model in our database. Jackery’s best showings are the expandable “Plus” models: the 1000 Plus matches the AC180 with 2,000 W of output, 800 W of solar and add-on packs against BLUETTI’s longer warranty and 3,500 rated cycles, and the 5000 Plus has no BLUETTI rival in its class.
One spec needs care. Jackery quotes cycle life to 70% capacity instead of the usual 80%, so its figures can’t be lined up directly against BLUETTI’s. The next section explains the difference.
Which brand’s batteries last longer, and what’s the warranty?
This is the biggest structural difference between the two brands.
| Jackery | BLUETTI | |
|---|---|---|
| Rated cycle life | 4,000 cycles to 70% (1000 v2, 1000 Plus, 2000 Plus, 3000 v2, 5000 Plus) | 3,000 to 6,000 cycles to 80% |
| Longest rating | 4,000 to 70% | 6,000 to 80% (Elite 200 V2, Apex 300) |
| Standard warranty | 3 years on the 300 Plus through 3000 v2; 5 years on the 5000 Plus | 5 years on every model we track |
Cycles to 70% and cycles to 80% aren’t the same claim. A battery that still holds 80% after 4,000 cycles is healthier than one that holds 70% after the same count. Jackery’s figure isn’t bad, since LiFePO4 at 70% still has years of use left, but it isn’t directly comparable to BLUETTI’s.
The warranty gap is easier to read. Five years against three is the manufacturer’s own bet on how long the unit lasts, and BLUETTI makes that bet on everything from the 9.48 lb Elite 30 V2 to the Apex 300.
Which charges faster from solar and the wall?
At 1kWh, BLUETTI isn’t close. The Elite 100 V2 accepts 1,000 W of solar at 12–60 V; the Explorer 1000 v2 tops out at 400 W across two 8mm inputs.
Here’s what that means with our solar math, which assumes panels deliver 75% of their rating:
| Solar setup | Explorer 1000 v2 (1,070 Wh) | Elite 100 V2 (1,024 Wh) |
|---|---|---|
| One 200 W panel (150 W real) | 7.1 h of full sun | 6.8 h |
| Two 200 W panels (300 W real) | 3.6 h | 3.4 h |
| Enough panels to max the input | 2.7 h at 400 W | 1.0 h at 1,000 W |
With one or two panels the brands are even, because neither hits its input limit. The gap only opens when you bring enough glass to use it, which matters for van builds and off-grid cabins more than weekend camping. Check exact pairings with our solar panel matcher, and size your array with how many solar panels you need.
At 2kWh the order flips. The Explorer 2000 Plus takes 1,400 W of solar against the Elite 200 V2’s 1,000 W. The Elite 200 V2 publishes a 1.4-hour wall recharge at 1,800 W; Jackery doesn’t publish a full-charge time for the 2000 Plus.
On wall charging at 1kWh, the Explorer 1000 v2 is rated 0–100% in one hour, but only after you enable emergency charging in the Jackery app. The Elite 100 V2 does it in 70 minutes.
How do Jackery and Bluetti compare on UPS, ports and weight?
- UPS switchover: Every portable Jackery we track switches in 20 ms. BLUETTI’s Elite 30 V2 and Elite 100 V2 are rated at 10 ms or less, and the Elite 200 V2 at 15 ms. Faster is better for desktop PCs and network gear that might reboot during the gap.
- Output at 1kWh: The Elite 100 V2 has 1,800 W continuous and 3,600 W surge against the Explorer 1000 v2’s 1,500 W and 3,000 W. That’s the difference between running a 1,800 W kettle or not.
- Output at 2kWh: Jackery leads with 3,000 W continuous and 6,000 W surge on the 2000 Plus, against 2,600 W on the Elite 200 V2 (BLUETTI doesn’t publish a surge figure for it).
- Weight: The Explorer 1000 v2 is the lightest 1kWh unit we track at 23.8 lb, 45 Wh per pound. The Elite 100 V2 is 25 lb. At 2kWh the Elite 200 V2 is 8.1 lb lighter than the 2000 Plus.
- Solar connector: Jackery’s 1kWh+ Explorers use 8mm DC inputs; most BLUETTI models use XT60, with exceptions on the AC180 (DC7909) and AC200L (2-pin aviation, 12–145 V).
Which brand has the better app and ecosystem?
Every current Jackery Explorer we track has Wi-Fi and Bluetooth app control. BLUETTI’s Elite line and the AC200L and Apex 300 do too, but the AC50B, AC70 and AC180 are Bluetooth-only, which means no remote monitoring once you leave the house.
Expansion is where the ecosystems really split:
- Jackery: The 1000 Plus takes up to three battery packs (though Jackery’s store notes the Battery Pack 1000 Plus is discontinued), the 2000 Plus up to five, and the 5000 Plus up to five 5,040 Wh packs. The 1000 v2 and 3000 v2 don’t expand.
- BLUETTI: The Elite 100 V2 and Elite 200 V2 don’t expand at all. The AC200L expands to 7,577.6 Wh and the Apex 300 takes up to six batteries. The AC50B and AC70 can only add a battery through Power Bank Mode.
App quality and long-term reliability aren’t things a spec sheet captures, so we don’t score them beyond whether Wi-Fi exists.
Which brand should you buy?
Buy BLUETTI for most mid-size and camping uses. The Elite 100 V2 is the stronger 1kWh station on paper: a 5-year warranty, 4,000 cycles to 80%, 10 ms UPS, 1,800 W output and 1,000 W of solar. At 2kWh the Elite 200 V2 is the higher scorer, on 6,000 rated cycles, 15 ms UPS and a 5-year warranty.
Buy Jackery if every pound counts at 1kWh (the 1000 v2 is the lightest we track) or you want a 2kWh station you can grow. The Explorer 2000 Plus pairs 3,000 W of output with add-on battery packs, which the fixed-capacity Elite 200 V2 can’t match.
Best 1kWh pick across both brands
BLUETTI Elite 100 V2
- Battery chemistry
- LiFePO4
- Rated cycle life
- 4,000
- AC output
- 1,800 W
- Energy density
- 40.96 Wh/lb
A 1,024Wh LiFePO4 portable power station with an 1,800W inverter, four AC outlets and a 140W USB-C port, aimed at campers, van users and short home-backup needs.
Strengths
- AC charging to 100% in 70 minutes.
- 1,000W solar input (12-60V) also charges to full in 70 minutes.
- 140W and 100W USB-C ports plus two DC5521 outputs.
- UPS switchover of 10ms or less.
Watch out for
- No battery expansion port is listed in the manual or spec sheet.
- Cigarette lighter and DC5521 ports share a 10A total limit.
- 25 lb is heavy for a 1kWh-class unit.
Best 2kWh pick across both brands
BLUETTI Elite 200 V2
- Battery chemistry
- LiFePO4
- Rated cycle life
- 6,000
- AC output
- 2,600 W
- Energy density
- 38.83 Wh/lb
A 2,073.6Wh LiFePO4 portable power station with a 2,600W inverter and four 120V/20A outlets, suited to RV trips, camping and home backup where a single fixed-capacity unit is enough.
Strengths
- LiFePO4 cells rated for 6,000+ cycles to 80% capacity.
- 1,800W AC charging reaches 100% in 1.4 hours.
- 1,000W solar input (12-60V) via XT60.
- Power Lifting mode runs resistive loads up to 3,900W.
Watch out for
- Not expandable: BLUETTI lists scalability as "No".
- UPS switchover is rated at up to 15ms, slower than some 10ms rivals.
- 53.4 lb with no wheels for a 2kWh-class unit.
Best expandable 2kWh (3,000 W, add-on packs)
Jackery Explorer 2000 Plus
- Battery chemistry
- LiFePO4
- AC output
- 3,000 W
- Energy density
- 33.22 Wh/lb
- Solar recharge rate
- 0.69 W per Wh
A 2,042.8Wh LiFePO4 power station with 3,000W of 120V output that accepts add-on battery packs, suited to home backup, RVs and off-grid cabins.
Strengths
- 3,000W continuous / 6,000W surge across five 120V outlets, including a 25A outlet
- Supports up to 5 Battery Pack 2000 Plus units
- Dual 8mm DC solar inputs, up to 1,400W combined (11-60V)
- AC expansion port to link a second unit
Watch out for
- About 61.5 lb before any battery packs
- UPS switchover is 20 ms; Jackery says it does not support 0 ms switching
- Cycle life is rated 4,000 cycles to 70%, not 80%
Lightest 1kWh station we track
Jackery Explorer 1000 v2
- Battery chemistry
- LiFePO4
- AC output
- 1,500 W
- Energy density
- 44.96 Wh/lb
- AC recharge time
- 60 min
A 1,070Wh LiFePO4 power station with 1,500W AC output in a 23.8 lb body, suited to camping, van trips and backup for small appliances.
Strengths
- 1,500W continuous / 3,000W surge AC output
- Jackery rates Emergency Super Charge at 0-100% in 1 hour
- Dual 8mm DC solar inputs, up to 400W combined (12-60V)
- 23.8 lb for 1,070Wh of LiFePO4 capacity
Watch out for
- The 1-hour charge requires enabling emergency charging in the Jackery app
- Not expandable with extra battery packs
- Solar input tops out at 400W
- Cycle life is rated 4,000 cycles to 70%, not 80%
If neither brand’s lineup fits your load, see our mid-size and home backup picks; our full power station rankings cover 39 models, and the runtime calculator shows what each will run for your actual appliances.
Frequently asked questions
Is Jackery or Bluetti better?
On our published rubric BLUETTI scores higher in the 300Wh, 1kWh, 2kWh and 3kWh classes, largely on warranty, rated cycle life and solar input, and the two tie at 1.1-1.3 kWh. Jackery's strengths are the Explorer 2000 Plus's output and expansion and the lightest 1kWh unit we track.
Which lasts longer, Jackery or Bluetti?
Both use LiFePO4 cells. BLUETTI rates its models for 3,000 to 6,000 cycles to 80% capacity; Jackery rates its Explorers for 4,000 cycles to 70%, a looser end point. BLUETTI also offers 5 years of warranty against Jackery's typical 3.
Do Jackery and Bluetti solar panels work with each other's stations?
Usually with an adapter. Most Jackery Explorers use 8mm DC solar inputs and most BLUETTI models use XT60, so you'll need the right cable. Check the panel's Voc against the station's voltage window first.
Which brand has the faster UPS?
BLUETTI's Elite 30 V2 and Elite 100 V2 switch in 10 ms or less and the Elite 200 V2 in 15 ms. Every portable Jackery Explorer we track is rated at 20 ms.